A N S I - S T
                 The Atari ST ANSI Screen Driver
              Copyright (c)1994 Uncensored Software
                    Version 0.40 (7 May 1994)

                       A Shareware Release

ANSI-ST is an ANSI screen driver for the Atari ST range of micros
designed to complement the built in VT-52 emulator which has very
little support outside of the Atari community. The majority of computers
today support a form of ANSI emulation - DOS PC's have the ANSI.SYS
screen driver but until now ANSI emulation on the ST has been limited
to a few select comms packages.

To install ANSI-ST on your system copy ANSI_ST.PRG into the AUTO folder
on your boot disk and reboot your ST. Make sure that ANSI-ST runs after
screen accelerators such as Warp9/NVDI. When running ANSI-ST will only
use about 10K of memory.

ANSI-ST works by intercepting any screen output and remapping ANSI
control sequences to ones that are displayable by the ST. Using this
technique allows VT52 codes also to be used therefore maintaining
compatibility with existing programs.