Index

A

: access methods for local authentication
: access protocol

for incoming calls
for outgoing calls
: Access-Accept

code field packet type
: Access-Challenge

code field packet type
: Access-Password-Ack

code field packet type
: Access-Password-Reject

code field packet type
: Access-Password-Request

code field packet type
: Access-Reject

code field packet type
: Access-Request

code field packet type
: accounting

and dynamic IP addressing
attributes in
attributes in Stop records
checkpoint records
description of RADIUS
duplicate or deleted records
Failure-to-start records
Failure-to-start records in
in RADIUS
login failure
on a per-user basis
sample records in
server (primary)
setting up
Start records in
Stop records in
troubleshooting
: Accounting-Request

code field packet type
: Accounting-Response

code field packet type
: Acct Max Retry parameter
: Acct-Authentic (45)

description/usage of
in Start records
in Stop records
: Acct-Delay-Time (41)

description/usage of
in Failure-to-start records
in Start records
in Stop records
: AcctEventType
: Acct-Input-Octets (42)

description/usage of
in Stop records
: Acct-Input-packets (47)

description/usage of
in Stop records
: Acct-Output-Octets (43)

description/usage of
in Stop records
: Acct-Output-packets (48)

description/usage of
in Stop records
: Acct-Session-Id (44)

description/usage of
filter change attribute
in Failure-to-start records
in Start records
in Stop records
with call logging
: Acct-Session-Time (46)

description/usage of
in Stop records
: Acct-Status-Type (40)

description/usage of
in Failure-to-start records
in Start records
in Stop records
: ACE

authentication
password
: ActivCard
: analog dial-in
: Answer Profile parameters and analogous attributes
: APP Server configuration
: APP Server utility

configuring the MAX to recognize
: ARA

and SecurID authentication
connection
password
setting up a connection
: ARA (262)

Framed-Protocol setting
: arguments

Ascend-Bridge-Address
Ascend-IP-Pool-Definition
Ascend-IPX-Route
Framed-Route
: Ascend Tunnel Management Protocol (ATMP)

across the Internet
between two IP networks
configured in foreign agent's Ethernet profile
connections
described
for MAX as multi-mode agent
MAX configuration parameters for
RADIUS attributes for
router and gateway modes for
set to bypass foreign agent
: Ascend-Access-Event-Request

code field packet type
: Ascend-Access-Event-Response

code field packet type
: Ascend-Access-New-Pin

code field packet type
: Ascend-Access-Next-Code

code field packet type
: Ascend-Add-Seconds (240)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Ara-PW (181)

Access-Accept attribute
ARA attribute
authentication attribute
description/usage of
password attribute
use
: Ascend-Assign-IP-Client (144)

Access-Accept attribute
description/usage of
IP routing attribute
: Ascend-Assign-IP-Global-Pool (146)

Access-Accept attribute
description/usage of
IP routing attribute
: Ascend-Assign-IP-Pool (218)

Access-Accept attribute
ARA attribute
description/usage of
IP routing attribute
: Ascend-Assign-IP-Server (145)

Access-Accept attribute
description/usage of
IP routing attribute
: Ascend-Authen-Alias (203)

Access-Accept attribute
authentication attribute
description/usage of
In pseudo-user profile
user name attribute
: Ascend-backup (176)

Access-Accept attribute
description/usage of
nailed-up attribute
: Ascend-BACP-Enable (134)

Access-Accept attribute
BACP attribute
description/usage of
: Ascend-Base-Channel-Count (172)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Billing-Number (249)

Access-Accept attribute
description/usage of
outgoing call attribute
: Ascend-Bridge (230)

Access-Accept attribute
bridging attribute
Combinet attribute
description/usage of
: Ascend-Bridge-Address (168)

Access-Accept attribute
arguments
bridging attribute
description/usage of
: Ascend-Callback (246)

Access-Accept attribute
authentication attribute
callback attribute
description/usage of
: Ascend-Call-By-Call (250)

Access-Accept attribute
description/usage of
outgoing call attribute
settings
: Ascend-Call-Filter (243)

Access-Accept attribute
description/usage of
filter change attribute
: Ascend-Call-Type (177)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
Nailed/MPP attribute
nailed-up attribute
: Ascend-Client-Gateway (132)

Access-Accept attribute
description/usage of
IP routing attribute
: Ascend-Connect-Progress (196)

codes
description/usage of
in Failure-to-start records
in Stop records
: Ascend-Data-Filter (242)

Access-Accept attribute
description/usage of
filter change attribute
: Ascend-Data-Rate (197)

description/usage of
in Failure-to-start records
in Stop records
: Ascend-Data-Svc (247)

Access-Accept attribute
attribute limiting access
description/usage of
Frame Relay Profile attribute
outgoing call attribute
: Ascend-DBA-Monitor (171)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Dec-Channel-Count (237)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-DHCP-Maximum-Leases

Access-Accept attribute
description/usage of
NAT for LAN attribute
: Ascend-DHCP-Pool-Number (148)

Access-Accept attribute
description/usage of
DHCP attribute
NAT for LAN attribute
: Ascend-DHCP-Reply (147)

Access-Accept attribute
description/usage of
DHCP attribute
: Ascend-Dial-Number (227)

Access-Accept attribute
authentication attribute
callback attribute
description/usage of
digits
in accounting record
outgoing call attribute
: Ascend-Dialout-Allowed (131)

Access-Accept attribute
description/usage of
terminal server attribute
: Ascend-Disconnect-Cause (195)

codes
description/usage of
in Failure-to-start records
in Stop records
: Ascend-Event-Type (150)

description/usage of
in Stop records
: Ascend-Expect-Callback (149)

Access-Accept attribute
description/usage of
outgoing call attribute
: Ascend-First-Dest (189)

Access-Accept attribute
description/usage of
in Stop records
: Ascend-Force-56 (248)

Access-Accept attribute
attribute limiting access
description/usage of
: Ascend-FR-Circuit-Name (156)

Access-Accept attribute
description/usage of
frame relay user profile attribute
: Ascend-FR-DCE-N392 (162)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-DCE-N393 (164)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-Direct (219)

Access-Accept attribute
description/usage of
frame relay user profile attribute
: Ascend-FR-Direct-DLCI (221)

Access-Accept attribute
description/usage of
frame relay user profile attribute
: Ascend-FR-Direct-Profile (220)

Access-Accept attribute
description/usage of
frame relay user profile attribute
: Ascend-FR-DLCI (179)

Access-Accept attribute
description/usage of
frame relay user profile attribute
: Ascend-FR-DTE-N392 (163)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-DTE-N393 (165)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-Link-Mgt (160)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-LinkUp (157)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-N391 (161)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-Nailed-Grp (158)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-Profile-Name (180)

Access-Accept attribute
description/usage of
frame relay user profile attribute
: Ascend-FR-T391 (166)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-T392 (167)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FR-Type (159)

Access-Accept attribute
backup attribute
description/usage of
Frame Relay Profile attribute
: Ascend-FT1-Caller (175)

Access-Accept attribute
description/usage of
Nailed/MPP attribute
nailed-up attribute
: Ascend-Group (178)

Access-Accept attribute
description/usage of
Nailed/MPP attribute
nailed-up attribute
: Ascend-Handle-IPX (222)

Access-Accept attribute
bridging attribute
description/usage of
: Ascend-History-Weigh-Type (239)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Home-Agent-IP-Addr (183)

in accounting Stop record
: Ascend-Home-Agent-Password (184)

Access-Accept attribute
ATMP connection attribute
description/usage of
: Ascend-Home-Agent-UDP-Port (186)

Access-Accept attribute
ATMP connection attribute
description/usage of
in Stop record
: Ascend-Home-Network-Name (185)

Access-Accept attribute
ATMP connection attribute
description/usage of
in accounting record
: Ascend-Host-Info (252)

Access-Accept attribute
description/usage of
terminal server attribute
: Ascend-Idle-Limit (244)

Access-Accept attribute
backup attribute
bandwidth management attribute
description/usage of
: Ascend-IF-Netmask (153)

interface-based routing attribute
: Ascend-IF-Netmask (154)

Access-Accept attribute
description/usage of
: Ascend-Inc-Channel-Count (236)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-IP-Direct (209)

Access-Accept attribute
description/usage of
IP routing attribute
: Ascend-IP-Pool-Definition (217)

Access-Accept attribute
arguments
description/usage of
IP routing attribute
: Ascend-IPX-Alias (224)

Access-Accept attribute
description/usage of
IPX routing attribute
: Ascend-IPX-Node-Addr (182)

Access-Accept attribute
ATMP connection attribute
description/usage of
: Ascend-IPX-Peer-Mode (216)

Access-Accept attribute
description/usage of
IPX routing attribute
: Ascend-IPX-Route (174)

Access-Accept attribute
arguments
description/usage of
IPX routing attribute
: Ascend-Link-Compression (233)

Access-Accept attribute
description/usage of
PPP attribute
: Ascend-Maximum-Call-Duration (125)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Maximum-Channels (235)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Maximum-Time (194)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Menu-Item (206)

Access-Accept attribute
description/usage of
terminal server attribute
: Ascend-Menu-Selector (205)

Access-Accept attribute
description/usage of
terminal server attribute
: Ascend-Metric (225)

Access-Accept attribute
description/usage of
IP routing attribute
: Ascend-Minimum-Channels (173)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-MPP-Idle-Percent (254)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Multicast-Client (152)

Access-Accept attribute
description/usage of
multicast forwarding attribute
: Ascend-Multicast-Rate-Limit (153)

Access-Accept attribute
description/usage of
multicast forwarding attribute
: Ascend-Multilink-ID (187)

Access-Accept attribute
description/usage of
in Stop records
: Ascend-Netware-timeout (223)

Access-Accept attribute
bridging attribute
description/usage of
: Ascend-Number-Sessions (202)

description/usage of
in Stop records
: Ascend-Num-In-Multilink (188)

Access-Accept attribute
description/usage of
in Stop records
: Ascend-Password-Expired

code field packet type
: Ascend-PPP-Address (253)

Access-Accept attribute
description/usage of
interface-based routing attribute
PPP attribute
: Ascend-PPP-Async-Map (212)

Access-Accept attribute
description/usage of
PPP attribute
: Ascend-PPP-VJ-1172 (211)

Access-Accept attribute
description/usage of
PPP attribute
: Ascend-PPP-VJ-Slot-Comp (210)

Access-Accept attribute
description/usage of
PPP attribute
: Ascend-Preempt-Limit (245)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Pre-Input-Octets (190)

Access-Accept attribute
description/usage of
in Stop records
: Ascend-Pre-Input-packets (192)

Access-Accept attribute
description/usage of
in Stop records
: Ascend-Pre-Output-Octets (191)

Access-Accept attribute
description/usage of
in Stop records
: Ascend-Pre-Output-packets (193)

Access-Accept attribute
description/usage of
in Stop records
: Ascend-PreSession-Time (198)

description/usage of
in Failure-to-start records
in Stop records
: Ascend-Primary-Home-Agent

Access-Accept attribute
ATMP connection attribute
description/usage of
: Ascend-PRI-Number-Type (226)

Access-Accept attribute
description/usage of
outgoing call attribute
: Ascend-PW-Expiration

function
: Ascend-PW-Expiration (21)

Access-Accept attribute
authentication attribute
description/usage of
password expiration attribute
: Ascend-PW-Lifetime (208)

Access-Accept attribute
authentication attribute
description/usage of
password expiration attribute
: Ascend-PW-Lifetime functions
: Ascend-Receive-Secret (215)

Access-Accept attribute
authentication attribute
CACHE-TOKEN attribute
description/usage of
: Ascend-Remote-Addr (155)

Access-Accept attribute
description/usage of
interface-based routing attribute
: Ascend-Remove-Seconds (241)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Require-Auth (201)

Access-Accept attribute
authentication attribute
description/usage of
for called-number authentication using the called number only
for CLID authentication using caller ID only
for external authentication after called-number authentication
for external authentication after CLID authentication
for requesting PAP, CHAP, or MS-CHAP after CLID authentication
: Ascend-Route-IP (228)

Access-Accept attribute
ARA attribute
description/usage of
IP routing attribute
: Ascend-Route-IPX (229)

Access-Accept attribute
description/usage of
IPX routing attribute
: Ascend-Secondary-Home-Agent

Access-Accept attribute
ATMP connection attribute
description/usage of
: Ascend-Seconds-Of-History (238)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Send-Auth (231)

Access-Accept attribute
authentication attribute
description/usage of
for requesting authentication protocol
MP and MP+ attribute
PPP attribute
: Ascend-Send-Passwd (232)

Access-Accept attribute
Access-Request attribute
authentication attribute
callback attribute
Combinet attribute
description/usage of
example
MP and MP+ attribute
password attribute
PPP attribute
when requesting an authentication protocol
: Ascend-Send-Secret (214)

Access-Accept attribute
Access-Request attribute
authentication attribute
callback attribute
Combinet attribute
description/usage of
example
MP and MP+ attribute
password attribute
PPP attribute
when requesting an authentication protocol
: Ascend-Session-Svr-Key (151)

description/usage of
filter change attribute
in Start records
: Ascend-Target-Util (234)

Access-Accept attribute
bandwidth management attribute
description/usage of
: Ascend-Terminate-Session

code field packet type
: Ascend-Third-Prompt (213)

Access-Accept attribute
description/usage of
: Ascend-Token-Expiry (204)

Access-Accept attribute
authentication attribute
CACHE-TOKEN attribute
description/usage of
: Ascend-Token-Idle (199)

Access-Accept attribute
authentication attribute
CACHE-TOKEN attribute
description/usage of
: Ascend-Token-Immediate (200)

Access-Accept attribute
authentication attribute
CACHE-TOKEN attribute
description/usage of
: Ascend-Transit-Number (251)

Access-Accept attribute
description/usage of
outgoing call attribute
: Ascend-TS-Idle-Limit (169)

Access-Accept attribute
description/usage of
terminal server attribute
: Ascend-TS-Idle-Mode (170)

Access-Accept attribute
description/usage of
terminal server attribute
: Ascend-User-Acct-Base (142)

description/usage of
in Start records
in Stop records
: Ascend-User-Acct-Host (139)

description/usage of
in Start records
: Ascend-User-Acct-Key (141)

description/usage of
in Start records
: Ascend-User-Acct-Port (140)

description/usage of
in Start records
: Ascend-User-Acct-Time (143)

description/usage of
in Start records
: Ascend-User-Acct-Type (138)

description/usage of
in Start records
: ASCII users file

replacing expired password for
running RADIUS daemon with
: async control character map

specified for PPP session
: AT&T settings
: ATMP see Ascend Tunnel Management Protocol
: Attribute list

RADIUS packet field
: attributes

Access-Accept
Access-Reject
Access-Request
Access-Terminate-Session
accounting
ACE authentication
ARA
Ascend-Access-Event-Request
Ascend-Access-Event-Response
authentication
backup
BACP
bandwidth management
bridging
CACHE-TOKEN
called-number authentication
Change-Filter-Request packet
Checkpoint packets
CLID authentication
Combinet
cross reference of parameters and analogous attributes
DHCP
Disconnect-Request
filter change
for ATMP
for configuring a PPP connection in RADIUS
for interface-based routing
for remote users
for specifying MAX IP address
Frame Relay Profile
frame relay user profile
in accounting Start records
in accounting Stop records
in alphabetical order
in Failure-to-start records
in numerical order
IP routing
IPX routing
limiting access to services and protocols
listing of RADIUS
MP and MP+
multicast forwarding
Nailed/MPP
nailed-up
NAS-Port (5)
NAT for LAN
non-ATMP
outgoing call
packet types
PAP-TOKEN authentication
password
specifying time limit and idle connection
TCP connection
terminal server
to specify authentication protocol
user name
: Auth parameter (for RADIUS configuration)
: Auth Port parameter (RADIUS setup)
: Auth Timeout parameter (RADIUS setup)
: authentication

access methods for local
CACHE-TOKEN
called-number
calling line ID
CHAP
CLID
described
Dialed Number Information Server (DNIS)
Dialed Number Information Service (DNIS)
during call answering
external server
MS-CHAP
PAP
PAP-TOKEN-CHAP
process of RADIUS
security card setup
security-card
server
specifying protocol for
terminal server connection
troubleshooting
via RADIUS
: average line utilization (ALU)

B

Backoff queue error message

backup server

BACP connection

configured in RADIUS
setting up

BAD AUTHENTICATOR error message

bandwidth

configuring DBA for
managing

bridging connections

attributes for
setting up
special requirements for IPX

Bridging Profile parameters and analogous attributes

builddbm file

C

CACHE-TOKEN authentication

CALC_DIGEST error message

call filters, see filters

call logging

attributes in Failure-to-start records
attributes in Start records
attributes in Stop records
configuring system-wide
enabling
with dynamic IP addressing

callback

example
security with Microsoft (CBCP)

callback attributes

called-number authentication (DNIS)

described
setting up
using external authentication after
using name, password, and the called number
using the called number only

Caller-Id (31)

Access-Accept attribute
Access-Request attribute
authentication attribute
description/usage of
for CLID authentication using name, password, and caller ID
for requesting PAP, CHAP, or MS-CHAP after CLID authentication
in accounting record
non-accounting attribute in accounting record

calling line ID (CLID) authentication

calls

answering process described
Ascend-Dial-Number digits for
disconnecting
setting up outgoing

CBCP (Microsoft's Callback Control Protocol)

Challenge-Response (3)

Access-Request attribute
authentication attribute
description/usage of

Change-Filter-Request

code field packet type

Change-Filter-Request-ACKed

code field packet type

Change-Filter-Request-NAKed

code field packet type

Change-Password (17)

Access-Accept attribute
authentication attribute
description/usage of

channels

restricting users to specific

CHAP authentication

CHAP UNIX FAILURE

error message

checkpoint records

circuit connections

described

Class (25)

Access-Accept attribute
Access-Request attribute
authentication attribute
description/usage of
in accounting record
non-accounting attribute in accounting record

classifying RADIUS user sessions

CLID authentication

requesting PAP, CHAP, or MS-CHAP after
using caller ID only
using external authentication after
using name, password, and caller ID
with PPTP

Client-Port-DNIS (30)

Access-Accept attribute
Access-Request attribute
authentication attribute
description/usage of
for called-number authentication
in accounting record

Client-Port-DNIS (30)in accounting record

clients file

creating
described
format of
MAX unit's name in

Code

RADIUS packet field

COMB (260)

Framed-Protocol setting

Combinet connection

caller's MAC address
configured in RADIUS
setting up

configuration

for ATMP in gateway mode
for ATMP in router mode
for interface-based routing in RADIUS
of ARA attributes in RADIUS
of BACP connection in RADIUS
of bridge entries
of Combinet connection in RADIUS
of default routes on a per-user basis
of Dynamic Bandwidth Allocation (DBA)
of filter changes
of generic filter
of IP address pool in RADIUS
of IP redirection
of MAX for RADIUS
of MP or MP+ connection in RADIUS
of multicast forwarding
of Nailed/MPP connection in RADIUS
of nailed-up connection in RADIUS
of PPP connection in RADIUS
of static IP routes
of static IPX routes

Connection Profile

for nailed-up connection
parameters and analogous attributes

connections

ARA
ATMP
BACP
bridging
circuit
Combinet
DHCP
dial-in client
enabling Telnet, TCP, and Rlogin
gateway
host-to-router
interface-based routing
IP routing
IPX routing
MP or MP+
Nailed/MPP
nailed-up
PPP
redirect
router-to-router
specifying time limit for idle
TCP between two MAX units
terminal server

CryptoCard

custom menu for terminal server connection

D

data compression for PPP link

data filters, see filters

DBM database

creating
starting RADIUS daemon for

Default profile

deleting nailed-up profiles

DES Gold

DES Silver

detail file

DHCP connection

DHCP connections

attributes for

Dialed Number Information Service authentication

dial-in user restriction

DICT_VAL_FIND error message

dictionary file

described
format of
moved to /etc/raddb

DigiPass

digital dial-in

digital modems access control to

DisconnectReasonType

Disconnect-Request

attributes
code field packet type

Disconnect-Request-ACKed

code field packet type

Disconnect-Request-NAKed

code field packet type

disconnects

setting up

DNIS authentication

with PPTP

DO DIAL command

Dynamic Bandwidth Allocation (DBA)

configuring

E

Enigma Logic server

CACHE-TOKEN settings for
PAP-TOKEN-CHAP settings for

error messages

backoff queue
in log file

Ethernet Profile

parameters and analogous attributes

Ethernet profile

configuring ATMP in foreign agent's
configuring ATMP in home agent's

EURAW (257)

Framed-Protocol setting

EUUI (258)

Framed-Protocol setting

expired passwords

F

Failure-to-start records

fields in RADIUS packets

files

clients
detail
dictionary
flat ASCII users
logfile
radiusd
radiusd.dbm
used by RADIUS
users

Filter Profile parameters and analogous attributes

filters

call filters for reducing connection costs
configuring changes for
configuring generic
configuring IP
data filters for dropping packets
generic call filter entries
generic data filter entries
how packets are compared
IP call filter entries
IP data filter entries
SAM numbering scheme in VT-100 interface
setting up

firewalls

with Filter-Id attribute

firewalls (SAM numbering scheme)

foreign agent

configured for ATMP across the Internet
configured in gateway mode
configured in router mode
MAX as
setting up ATMP to bypass

FR (261)

Framed-Protocol setting

frame relay connections

profiles for
setting up in RADIUS user profile
starting and dropping
using the MAX as a frame relay concentrator

Frame Relay Profile parameters and analogous attributes

Framed-Address (8)

Access-Accept attribute
ARA attribute
description/usage of
IP routing attribute
non-accounting attribute in accounting record
outgoing call attribute

Framed-Compression (13)

Access-Accept attribute
Combinet attribute
description/usage of
MP and MP+ attribute
PPP attribute

Framed-IP-Address (8)

filter change attribute

Framed-IPX-Network (23)

Access-Accept attribute
ATMP connection attribute
description/usage of
in accounting record

Framed-MTU (12)

Access-Accept attribute
description/usage of
Frame Relay Profile attribute
PPP attribute

Framed-Netmask (9)

Access-Accept attribute
ARA attribute
description/usage of
IP routing attribute
outgoing call attribute

Framed-Protocol (7)

Access-Accept attribute
Access-Request attribute
ARA attribute
attribute limiting access
authentication attribute
Combinet attribute
description/usage of
for requesting PAP, CHAP, or MS-CHAP after CLID authentication
frame relay user profile attribute
MP and MP+ attribute
nailed-up attribute
non-accounting attribute in accounting record
PPP attribute
settings

Framed-Route (22)

Access-Accept attribute
arguments
description/usage of
IP routing attribute

Framed-Routing (10)

Access-Accept attribute
description/usage of

FR-CIR (263)

Framed-Protocol setting

G

gateway connections described

gateway mode

ATMP for IP network in
configuring ATMP

generic filter

configuring
syntax elements for

H

home agent

configured
configured for gateway mode
configured for router mode
MAX as

host list setting up terminal server

host routes

summarizing in IP address pool

host-to-router connection

I

Identifier (RADIUS packet field)

idle timer (terminal server)

input prompt for terminal server connection

installing radipad

installing RADIUS

interface-based routing connections

configuration for
RADIUS attributes for
setting up

interfaces

to frame relay links

Internet

ATMP across the

IP addresses

defined for dynamic assignment
requiring that a caller accept from the MAX
specifying MAX

IP call filter

syntax elements for

IP data filter

syntax elements for

IP filter

configuring
syntax elements for

IP networks

ATMP between two
ATMP in gateway mode for
ATMP in router mode for

IP routing

configuring redirection of
configuring static routes
introduction to system-based
setting up
specifying default routes on a per-user basis

IPX Route Profile

parameters and analogous attributes

IPX routing

attributes

IPX routing connections

configuring
setting up

K

keyword representing a pseudo-user profile

L

Length (RADIUS packet field)

lines

restricting users to specific

local authentication access methods

logfile

creating
described

login failure (accounting)

Login-Host (14)

Access-Accept attribute
description/usage of
TCP connection attribute
terminal server attribute

Login-Service (15)

Access-Accept attribute
description/usage of
TCP connection attribute
terminal server attribute

Login-TCP-Port (16)

Access-Accept attribute
Access-Reject attribute
description/usage of
TCP connection attribute
terminal server attribute

M

MAC address for Combinet calls

MAX

as multi-mode agent
bridging connections for
configured for the RADIUS server
specifying IP address for

MAX name (in a clients file)

MAX unit's name (Ascend-Authen-Alias attribute)

MCI settings

message text

setting up terminal server

Microsoft

mobile node

configuring incoming RADIUS user profile for
ensuring other hosts can route to
specifying subnet mask for

modifying nailed-up profiles

MP or MP+ connection

configured in RADIUS
setting up

MPP (256)

Framed-Protocol setting

MS-CHAP authentication

multicast forwarding setting up

N

Nailed

Nailed/MPP connection

configured in RADIUS
setting up

nailed-up connection

configured for Connection Profile
configured in RADIUS
setting up

NAS-Identifier (4)

Access-Request attribute
authentication attribute
description/usage of
example
for specifying MAX IP address
non-accounting attribute in accounting record

NAS-Port (5)

Access-Request attribute
authentication attribute
description/usage of
in accounting record

NAS-Port-Type (61)

Access-Request attribute
attribute limiting access
description/usage of

NAT for LAN

attributes for

Network Address Translation (NAT) for LAN

NNI interface described

non-accounting attributes

non-ATMP attributes

non-ATMP parameters

O

outgoing calls access protocol

outgoing calls setting up

P

packets

code field types in RADIUS
fields in RADIUS
for RADIUS attributes
formats of RADIUS
specifying maximum number of bytes in

PAP authentication described

PAP-TOKEN authentication

PAP-TOKEN-CHAP authentication

parameters

ATMP
cross reference of attributes and
non-ATMP

Password

in the Auth Key parameter (for RADIUS)

Password (2)

Access-Request attribute
ACE authentication attribute for remote users
ARA attribute
attribute limiting access
authentication attribute
CACHE-TOKEN attribute
Combinet attribute
description/usage of
for called-number authentication (DNIS)
for CLID authentication
for external authentication
for requesting PAP, CHAP, or MS-CHAP after CLID authentication
Frame Relay Profile attribute
frame relay user profile attribute
MP and MP+ attribute
nailed-up attribute
outgoing call attribute
PAP-TOKEN attribute
password attribute
PPP attribute
TCP connection attribute
terminal server attribute

passwords

ACE
ARA
attributes for
changing expired
changing non-expired
SAFEWORD
specifying expiration for

PPP (1)

Framed-Protocol setting

PPP connection setting up

PPP login

PPTP

CLID and DNIS routing
configuring call routing to

primary RADIUS server

profiles

configuring ATMP in foreign agent's Ethernet
configuring Connection
configuring incoming RADIUS
configuring outgoing RADIUS
configuring static IP routes in dial-in user
configuring static IP routes in pseudo-user
cross reference of parameters/attributes and
for frame relay connections
modifying or deleting nailed-up
setting up frame relay link in RADIUS user

ProgressType

protocol-independent bridging

pseudo-user profile

R

radipad

installing

RADIUS

accounting
applications
authentication
configuring ARA connection in
configuring BACP connection in
configuring Combinet connection in
configuring MAX for
configuring MP or MP+ connection in
configuring multicast forwarding in
configuring Nailed/MPP connection in
configuring nailed-up connection in
configuring PPP connection in
files used in
installing
packet formats in
requirements for
restrictions to specific lines and channels
See also attributes, parameters, profiles
setting up outgoing calls in
specifying disconnects in
specifying filter changes in
starting
troubleshooting
use of Change-Filter-Request packet attributes
use of Disconnect-Request packet attributes

RADIUS user profile

configuring incoming
configuring outgoing

radiusd file

radiusd.dbm command

radiusd.dbm file

redirect connections described

Reply-Message (18)

Access-Accept attribute
Access-Reject attribute
description/usage of
terminal server attribute

restricting dial-in user services

RIP behavior

specifying

Rlogin connection

Route Profile parameters and analogous attributes

router mode

configuring ATMP
configuring foreign agent in
configuring home agent in

router-to-router connection

S

SafeWord MultiSync

SAFEWORD password

SafeWord SofToken

SAM

firewall numbering scheme in VT-100 interface

secondary RADIUS server

SecureNet Key

SecurID server

security callback

Security Dynamics ACE/Server

and ARA
PAP-TOKEN for

security-card authentication

APP Server utility
description
setting up
setting up CACHE-TOKEN
setting up PAP-TOKEN
setting up PAP-TOKEN-CHAP
specifying the security-card server

SLIP (2)

Framed-Protocol setting

slot compression turning off

SNMP specifies the RADIUS server

Sprint settings

Start records

starting RADIUS

status information (V.110 call)

Stop records

subnet mask (mobile nodes)

system-wide accounting parameters

T

TCP connection enabling

TCP/IP header compression turning on

Telnet connection enabling

terminal server connection

authentication
configuring custom menu and input prompt for
enabling Telnet, TCP, and Rlogin
setting up
setting up idle timer
setting up message text and host list

troubleshooting

accounting problems
authentication

tunnels (per-user)

U

U.S Interexchange Carrier (IEC)

UNI-DCE interface

UNI-DTE interface

UNIX DBM database

user name attributes

user sessions classified

User-Name (1)

Access-Request attribute
ACE authentication attribute for remote users
ARA attribute
attribute limiting access
authentication attribute
CACHE-TOKEN attribute
Combinet attribute
description/usage of
filter change attribute
for called-number authentication using name, password, and the called number
for called-number authentication using the called number only
for CLID authentication using caller ID only
for CLID authentication using name, password, and caller ID
for external authentication after called-number authentication
for external authentication after CLID authentication
for requesting PAP, CHAP, or MS-CHAP after CLID authentication
Frame Relay Profile attribute
frame relay user profile attribute
in accounting record
MP and MP+ attribute
nailed-up attribute
outgoing call attribute
PAP-TOKEN attribute
PPP attribute
TCP connection attribute
terminal server attribute
user name attribute

users file

creating
format of
running RADIUS with flat ASCII

User-Service (6)

Access-Accept attribute
Access-Request attribute
attribute limiting access
authentication attribute
for requesting PAP, CHAP, or MS-CHAP after CLID authentication
Frame Relay Profile attribute
frame relay user profile attribute
MP and MP+ attribute
nailed-up attribute
outgoing call attribute
PPP attribute
terminal server attribute

V

V.110 call status values

Virtual Private Network (VPN)

W

WatchWord

WRONG NAS ADDRESS error message

techpubs@eng.ascend.com

Copyright © 1998, Ascend Communications, Inc. All rights reserved.